All prices discounted net
Hot-dip galvanised (HDG) installation girders with greater adjustability for heavy-duty applications
- Material composition: DD11 MOD – HN 555-4, S235JR – EN10025-2
- Surface finish: Hot-dip galvanised, 75µm - DIN EN ISO 1461
From
OMR 53.790
Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to concrete using two anchors
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 44.510
Connector
- Weight: 2.21 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
OMR 24.450
Connector (steel)
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 58.160
Hot-dip galvanised (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications
- Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt 48 µm - DIN EN ISO 10684; Nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 17.160
Hot-dip galvanised (HDG) single beam clamp for connecting MIQ steel baseplates to steel beams
- Thread connection - M: M12
- Weight: 0.36 kg
- Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
OMR 7.550
Hot-dip galvanised (HDG) connector used to connect MI girders longitudinally for long spans in heavy-duty applications
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 87.220
Connector
- Weight: 2.51 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
OMR 33.520
Standard hot-dip galvanised (HDG) connector for fastening MI girders to one another
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Bolt, Nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 32.360
Hot-dip galvanised (HDG) connector for fastening MI girders perpendicularly to one another
- Weight: 2.2 kg
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Tooth plate: S235 - EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
OMR 74.060
Hot-dip galvanised (HDG) connector for fastening MI girders perpendicularly to one another
- Weight: 4.05 kg
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Tooth plate: S235 - EN10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
OMR 48.420
Hot-dip galvanised (HDG) multi-angle connector used with MIC-MAH connectors for fastening MI girders to one another at an angle
- Weight: 2.63 kg
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Tooth plate: S235 - EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
OMR 62.550
Girder end cap for safer and neater covering of MI and MIQ girder ends
- Material composition: Moplen EP 240H
- Temperature resistance: -30 - 90 °C
From
OMR 0.430
Hot-dip galvanised (HDG) connector for fastening MQ strut channels parallel to MI girders
- Weight: 0.06 kg
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt 45 µm - DIN EN ISO 1461
OMR 4.420
Hot-dip galvanised (HDG) connector for fastening MQ strut channels perpendicular to MI girders
- Weight: 0.36 kg
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 40 µm - DIN EN ISO 10684
OMR 14.060
Easy hand screw
- Material composition: Bolt: Steel grade 8.8; Tooth plate: S235 - EN 10025-2
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 3.670
Hot-dip galvanised (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors
- Weight: 0.29 kg
- Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Spring: EN 10270-3
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
OMR 7.220
Hot-dip galvanised (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition: Steel grade 8.8
- Surface finish: HDG: 45 µm - DIN EN ISO 10684
- Tightening torque: 84 Nm
From
OMR 1.940
Hot-dip galvanised (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors
- Weight: 0.06 kg
- Material composition: S235 - EN 10025-2
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
OMR 1.490
Hot-dip galvanised (HDG) hexagon nut with self-locking mechanism used with all MI connectors
- Weight: 0.02 kg
- Material composition: Steel grade 8
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
OMR 0.620
MP-US OC
Premium
Outdoor coated (OC) pipe straps for universal piping applications
- Material composition: DX51D-ZM300 - EN 10346:2015
- Surface finish: Zinc-Magnesium coating
- Product class: Premium
From
OMR 0.620
Hot-dip galvanised (HDG) U-bolt for fastening uninsulated pipes to MI girders
- Material composition: U-bolt: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Nut: Steel grade 8
- Surface finish: HDG: 45 µm - DIN EN ISO 10684
From
OMR 2.060
Galvanised U-bolt for fastening uninsulated pipes to MI girders
- Material composition: S235JR - DIN EN 10025
- Surface finish: Galvanized
From
OMR 0.850
Hot-dip galvanised (HDG) connector for fastening U-bolts to MI girders
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Washer: DIN EN ISO 7089; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: connector, square washer 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Wrench size: 19 mm
From
OMR 10.970
Hot-dip galvanised (HDG) grade 8 hexagon nut corresponding to DIN 934
- Material composition: Steel grade 8
- Surface finish: Hot-dip galvanized - DIN EN ISO 10684
- Base material type: n/a
From
OMR 0.040
Hot-dip galvanised (HDG) coupling nut for extending threaded rods
- Material composition: Steel grade 4.6
- Surface finish: Hot-dip galvanized
- Base material type: n/a
From
OMR 0.250
Hilti Website