All prices discounted net
Galvanised installation channel for 2D and 3D indoor applications
- Height: 41 mm
- Material thickness: 1.6 mm
- Material composition: Structural steel with minimum yield strength of 280 N/mm2
OMR 21.670
Galvanised installation channel for higher load requirements and indoor use
- Height: 72 mm
- Material thickness: 2.75 mm
- Material composition: Structural steel with a minimum yield strength of 250 N/mm2
OMR 59.350
Galvanised wing nut for fastening threaded components/bolts to the open face of MC installation channels
- Tightening torque: 40 Nm
- Thread connection - M: M10
- Material composition: QStE 380 TM - SEW 092
OMR 0.400
Galvanised wing nut for simultaneously attaching multiple threaded components/bolts to any face of MC-3D installation channels
- Tightening torque: 40 Nm
- Thread connection - M: M10
- Material composition: QStE 380 TM - SEW 092
OMR 1.250
Galvanised bracket for supporting light electrical cable trays (<600 mm wide) from MC installation channels indoors
- Material thickness: 1.5 mm
- Material composition: Structural steel with a minimum yield strength of 250 N/mm2
- Surface finish: Sendzimir galvanized
OMR 8.330
Galvanised angle connector for 90-degree attachment of MC-3D channels to one another with higher load requirements indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 1.800
Galvanised angle plate connector for cost-effective 90-degree attachment of MC-3D channels to one another indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 1.030
Galvanised, adjustable angle connector for the 90-degree attachment of MC-3D channels to one another indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 1.230
Galvanised connector for fastening MC installation channels perpendicularly to concrete substructures with higher load requirements indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Weight: 925 g
OMR 4.630
Galvanised cross connector for attaching MC installation channels within 3D structures indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 5.570
Galvanised connector to longitudinally join adjacent MC installation channels indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 4.400
Galvanised connector for fastening MC-3D installation channels to a concrete substructure or another channel indoors – either perpendicularly or at an angle
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 3.950
Galvanised channel stiffening insert for use where threaded components/bolts are fitted through the sides of MC-3D installation channel indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Weight: 18 g
OMR 0.480
Galvanised load distribution plate for use where threaded components/bolts are fitted through the open face of MC-3D installation channel indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 0.560
Hot-dip galvanised (HDG) load distribution plate for use where threaded components/bolts are fitted through the open face of MC-3D installation channel outdoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 0.580
Galvanised connection screw to fix connections to the back face of MC installation channels indoors
- Material composition: Steel grade 8.8
- Surface finish: Electrogalvanized
- Weight: 47 g
OMR 0.720
Galvanised connection screw to fix connections to the back or side face of MC-3D installation channels indoors
- Material composition: Steel grade 8.8
- Surface finish: Electrogalvanized
- Weight: 17 g
OMR 0.160
Galvanised prevailing torque hexagon nut with self-locking mechanism for use indoors
- Material composition: Steel grade 8
- Surface finish: Electrogalvanized
- Weight: 16 g
OMR 0.300
Bracket
- Material thickness: 1.6 mm
- Material composition: Structural steel with a minimum yield strength of 275 N/mm2 for the channel, 355 N/mm2 for the plate
- Surface finish: Electrogalvanized
From
OMR 10.800
Hilti Website