Galvanized channel stiffening insert for use where threaded components/bolts are fitted through the sides of MC-3D installation channel indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Weight: 18 g
OMR 0.480
Hot-dip galvanized (HDG) channel stiffening insert for use where threaded components/bolts are fitted through the sides of MC-3D installation channel outdoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Weight: 18 g
OMR 0.430
Galvanized load distribution plate for use where threaded components/bolts are fitted through the open face of MC-3D installation channel indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 0.560
Hot-dip galvanized (HDG) load distribution plate for use where threaded components/bolts are fitted through the open face of MC-3D installation channel outdoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 0.580
Galvanized connection screw to fix connections to the back face of MC installation channels indoors
- Material composition: Steel grade 8.8
- Surface finish: Electrogalvanized
- Weight: 47 g
OMR 0.720
Hot-dip galvanized (HDG) connection screw to fix connections to the back face of MC installation channels outdoors
- Material composition: Steel grade 8.8
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Weight: 47 g
OMR 0.750
Galvanized connection screw to fix connections to the back or side face of MC-3D installation channels indoors
- Material composition: Steel grade 8.8
- Surface finish: Electrogalvanized
- Weight: 17 g
OMR 0.160
Hot-dip galvanized (HDG) connection screw to fix connections to the back or side face of MC-3D installation channels outdoors
- Material composition: Steel grade 8.8
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Weight: 17 g
OMR 0.190
Galvanized prevailing torque hexagon nut with self-locking mechanism for use indoors
- Material composition: Steel grade 8
- Surface finish: Electrogalvanized
- Weight: 16 g
OMR 0.300
Hot-dip galvanized (HDG) prevailing torque hexagon nut with self-locking mechanism for use outdoors
- Material composition: Steel grade 8
- Surface finish: Hot-dip galvanized
- Weight: 16 g
OMR 0.510
Bracket
- Material thickness: 1.6 mm
- Material composition: Structural steel with a minimum yield strength of 275 N/mm2 for the channel, 355 N/mm2 for the plate
- Surface finish: Electrogalvanized
From
OMR 10.800
Bracket HDG
- Material thickness: 1.6 mm
- Material composition: Structural steel with a minimum yield strength of 275 N/mm2 for the channel, 355 N/mm2 for the plate
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
From
OMR 10.300
Galvanized bracket for supporting light electrical cable trays (<600 mm wide) from MC installation channels indoors
- Material thickness: 1.5 mm
- Material composition: Structural steel with a minimum yield strength of 250 N/mm2
- Surface finish: Sendzimir galvanized
OMR 8.330
Hot-dip galvanized (HDG) bracket for supporting light electrical cable trays (<600 mm wide) from MC installation channels outdoors
- Material thickness: 1.5 mm
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
From
OMR 4.490
Galvanized angle connector for 90-degree attachment of MC-3D channels to one another with higher load requirements indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 1.800
Hot-dip galvanized (HDG) angle connector for 90-degree attachment of MC-3D channels to one another with higher load requirements outdoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 2.340
Galvanized angle plate connector for cost-effective 90-degree attachment of MC-3D channels to one another indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 1.030
Hot-dip galvanized (HDG) angle plate connector for cost-effective 90-degree attachment of MC-3D channels to one another outdoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 1.050
Galvanized, adjustable angle connector for the 90-degree attachment of MC-3D channels to one another indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 1.230
Galvanized, adjustable angle connector for the 90-degree attachment of MC-3D channels to one another outdoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 1.340
Galvanized connector for fastening MC installation channels perpendicularly to concrete substructures with higher load requirements indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Weight: 925 g
OMR 4.630
Hot-dip galvanized (HDG) connector for fastening MC installation channels perpendicularly to concrete substructures with higher load requirements outdoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Weight: 925 g
OMR 4.940
Galvanized cross connector for attaching MC installation channels within 3D structures indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 5.570
Hot-dip galvanized (HDG) cross connector for attaching MC installation channels within 3D structures outdoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 4.980
Galvanized connector to longitudinally join adjacent MC installation channels indoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 4.400
Hot-dip galvanized (HDG) connector to longitudinally join adjacent MC installation channels outdoors
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 3.840
Galvanized connector for fastening MC-3D installation channels to a concrete substructure or another channel indoors – either perpendicularly or at an angle
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Electrogalvanized
- Material thickness: 4 mm
OMR 3.950
Hot-dip galvanized (HDG) connector for fastening MC-3D installation channels to a concrete substructure or another channel outdoors – either perpendicularly or at an angle
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 4.940
Hot-dip galvanized (HDG) angle connector to attach MC installation channels to MI girders
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 2.120
Galvanized installation channel for 2D and 3D indoor applications
- Height: 41 mm
- Material thickness: 1.6 mm
- Material composition: Structural steel with minimum yield strength of 280 N/mm2
OMR 21.670
Hot-dip galvanized (HDG) installation channel for 2D and 3D outdoor applications
- Height: 41 mm
- Material thickness: 1.6 mm
- Material composition: Structural steel with minimum yield strength of 275 N/mm2
OMR 4.890
Galvanized installation channel for higher load requirements and indoor use
- Height: 72 mm
- Material thickness: 2.75 mm
- Material composition: Structural steel with a minimum yield strength of 250 N/mm2
OMR 59.350
Hot-dip galvanized (HDG) installation channel for higher load requirements and outdoor use
- Height: 72 mm
- Material thickness: 2.75 mm
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
OMR 78.360
Galvanized wing nut for fastening threaded components/bolts to the open face of MC installation channels
- Tightening torque: 40 Nm
- Thread connection - M: M10
- Material composition: QStE 380 TM - SEW 092
OMR 0.400
Hot-dip galvanized (HDG) wing nut for fastening threaded components/bolts to the open face of MC installation channels
- Tightening torque: 40 Nm
- Thread connection - M: M10
- Material composition: QStE 380 TM - SEW 092
OMR 0.420
Galvanized wing nut for simultaneously attaching multiple threaded components/bolts to any face of MC-3D installation channels
- Tightening torque: 40 Nm
- Thread connection - M: M10
- Material composition: QStE 380 TM - SEW 092
OMR 1.250
Hot-dip galvanized (HDG) wing nut for simultaneously attaching multiple threaded components/bolts to any face of MC-3D installation channels
- Tightening torque: 40 Nm
- Thread connection - M: M10
- Material composition: QStE 380 TM - SEW 092
OMR 1.500