Hot-dip galvanized installation channel
- Height: 20.6 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
From
OMR 42.730
Installation channel
- Height: 20.6 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
OMR 47.990
Installation channel
- Height: 20.6 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
OMR 30.800
Installation channel
- Height: 41.3 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
OMR 10.090
Installation channel
- Height: 41.3 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
OMR 40.020
Hot-dip galvanized installation channel
- Height: 82.6 mm
- Material thickness: 2 mm
- Material composition: S250GD - DIN EN 10346
OMR 22.870
Hot-dip galvanized double installation channel (HDG plus)
- Height: 82.6 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
OMR 19.290
Hot-dip galvanized installation channel
- Height: 52 mm
- Material thickness: 2.5 mm
- Material composition: S235JR - DIN EN 10025
OMR 81.840
Installation channel
- Height: 52 mm
- Material thickness: 2.5 mm
- Material composition: S235JR - DIN EN 10025
OMR 68.650
Hot-dip galvanized installation channel
- Height: 72 mm
- Material thickness: 2.75 mm
- Material composition: S235JR - DIN EN 10025
OMR 129.980
Installation channel
- Height: 72 mm
- Material thickness: 2.75 mm
- Material composition: S235JR - DIN EN 10025
OMR 102.340
Hot-dip galvanized bracket
- Material thickness: Channel: 2 mm, Baseplate: 6 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
OMR 11.850
Hot-dip galvanized bracket
- Material thickness: Channel: 2 mm, Baseplate: 8 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
From
OMR 11.720
MQN-HDG plus
Premium
Channel connector HDG plus
- Product class: Premium
- Tightening torque: 40 Nm
- Material composition: Bolt: M10 grade 8.8 - DIN ISO 898, Nut: C4C - DIN EN 10263, Plate: DD11 - DIN EN 10111
OMR 1.660
Hot-dip galvanized pipe ring saddle
- Material composition: Nut: EN-GJMW-450-7 - DIN EN 1562, Plate: S235JR - DIN EN 10025, Plastic: PB
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
From
OMR 1.450
Hot-dip galvanized wing nut
- Tightening torque: 40 Nm
- Thread connection - M: M12
- Material composition: Wings: plastic PA, Nut: C4C - DIN EN 10263
OMR 1.590
Wing nut
- Material composition: Wings: plastic PA, Nut: QStE 380 TM, SEW 92
- Surface finish: Multi-layer coating
From
OMR 0.580
Hot-dip galvanized drilled plate
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
From
OMR 0.890
Hot-dip galvanized angle
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
From
OMR 0.980
Hot-dip galvanized angle
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
From
OMR 1.590
Hot-dip galvanized angle bracket
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
From
OMR 4.940
Hot-dip galavanized longitudinal connector
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 1.640
Hot-dip galavanized longitudinal connector
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 5.300
Hot-dip galvanized flat connector
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 2.610
Hot-dip galvanized rail support
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 4.660
Connector 2-D HDG
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
From
OMR 4.580
Hot-dip galvanized 3-D connector
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
From
OMR 7.710
Hot-dip galvanized rail support
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 1.200
Hot-dip galvanized rail support
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 4.270
Hot-dip galvanized rail support
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
From
OMR 12.390
Hot-dip galvanized beam clamp
- Material composition: U-bolt: S235JRG2 - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
From
OMR 3.660
Clamp (channel to channel) HDG
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
From
OMR 2.720
Hot-dip galvanized clamp (channel to concrete)
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 4.890
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Channel stiffener insert
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Weight: 18 g
OMR 0.430
Channel connection screw
- Material composition: Steel grade 8.8
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Weight: 47 g
OMR 0.750
Channel insert screw
- Material composition: Steel grade 8.8
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Weight: 17 g
OMR 0.190
Hot-dip galvanized (HDG) prevailing torque hexagon nut with self-locking mechanism for use outdoors
- Material composition: Steel grade 8
- Surface finish: Hot-dip galvanized
- Weight: 16 g
OMR 0.510
Bracket HDG
- Material thickness: 1.6 mm
- Material composition: Structural steel with a minimum yield strength of 275 N/mm2 for the channel, 355 N/mm2 for the plate
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
From
OMR 10.300
Electrical bracket HDG
- Material thickness: 1.5 mm
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
From
OMR 4.490
Angle HDG
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 2.340
Flat angle HDG
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 1.050
Height-adjustable angle HDG
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 1.340
Base connector HDG
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Weight: 925 g
OMR 4.940
Height-adjustable connector HDG
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 4.980
Longitudinal channel connector HDG
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 3.840
Universal connector HDG
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 4.940
Height-adjustable angle HDG
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
OMR 2.120
Installation channel HDG
- Height: 41 mm
- Material thickness: 1.6 mm
- Material composition: Structural steel with minimum yield strength of 275 N/mm2
OMR 4.890
Hot-dip galvanized (HDG) installation channel for higher load requirements and outdoor use
- Height: 72 mm
- Material thickness: 2.75 mm
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
OMR 78.360
Wing nut
- Tightening torque: 40 Nm
- Thread connection - M: M10
- Material composition: QStE 380 TM - SEW 092
OMR 0.420
Wing nut
- Tightening torque: 40 Nm
- Thread connection - M: M10
- Material composition: QStE 380 TM - SEW 092
OMR 1.500
- Height: 90 mm
- Material composition: S275JR - EN 10025
- Surface finish: Hot-dip galvanised, 65µm – DIN EN ISO 1461
OMR 77.130
Beam clamp
- Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 17.160
Girder
- Material composition: DD11 MOD – HN 555-4, S235JR – EN10025-2
- Surface finish: Hot-dip galvanised, 75µm - DIN EN ISO 1461
From
OMR 53.790
Connector (concrete)
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 44.510
Connector (steel)
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 58.160
Connector
- Weight: 2.21 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
OMR 24.450
Connector (concrete)
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
Connector
- Weight: 2.51 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
OMR 33.520
Standard hot-dip galvanized (HDG) connector for fastening MI girders to one another
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 32.360
Connector
- Weight: 2.2 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
OMR 74.060
Connector
- Weight: 4.05 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
OMR 48.420
Connector
- Weight: 2.63 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
OMR 62.550
Connector
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 87.220
Girder end cap
- Material composition: Moplen EP 240H
- Temperature resistance: -30 - 90 °C
From
OMR 0.430
Hot-dip galvanized (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition: Steel grade 8.8
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 1.940
Easy hand screw
- Material composition: Bolt: 8.8 grade steel; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
From
OMR 3.670
Prevailing torque hex nut
- Weight: 0.02 kg
- Material composition: Steel grade 8
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
OMR 0.620
Hot-dip galvanized (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors
- Weight: 0.06 kg
- Material composition: S235 - EN 10025-2
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
OMR 1.490
Hot-dip galvanized (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors
- Weight: 0.29 kg
- Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; spring: 1.4319 AISI 302, 1.431 DIN EN 10088
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
OMR 7.220
Connector
- Weight: 0.06 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt 45 µm - DIN EN ISO 1461
OMR 4.420
MI/MQ cross connector
- Weight: 0.36 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 40 µm - DIN EN ISO 10684
OMR 14.060