Search Results
1104
Products for "MT modular supports system for raised floor soluti"
Filter
- Description
- High-performance anchor rod for adhesive capsules (high corrosion resistance)
- Material, corrosion
- Stainless steel, HCR (high corrosion resistance)
- Environmental conditions
- Highly corrosive special applications (e.g. tunnels, swimming pools), Underwater, salty water
- Base materials
- Concrete (cracked), Concrete (non-cracked)
- Description
- Ultimate-performance anchor rod for injectable hybrid anchors (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Environmental conditions
- Dry indoor
- Base materials
- Concrete (cracked), Concrete (non-cracked)
standard
- Description
- Single nail for fastening to concrete using powder-actuated tools
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
New
standard
- Description
- Metal double cable/conduit clip for use with collated nails
- Application
- Conduit Fastening, Cable Fastenings, Piping Connections
- Material
- Carbon steel
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Description
- Plug seal for sealing single cables/pipes in round penetrations
- Storage and transportation temperature range
- 5 - 25 °C
- Application temperature range
- -20 - 50 °C
- Description
- hot-dip galvanised (HDG) box profile for heavy-duty applications
- Material composition
- S275JR - EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) channel connector for two-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) channel connector for three-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) channel connector for two-dimensional structures
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) coupling nut for extending threaded rods
- Material composition
- Steel grade 4.6
- Surface finish
- Outdoor Coated - HDG
- Base material type
- n/a
- Description
- Stainless steel (A4) coupling nut for extending threaded rods
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanised bored plate for fire-tested trapeze assembly and anchoring
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised heavy air duct bracket for fastening heavy ventilation ducts
- Approvals
- Acustic insulaton DIN 4109 inspected
- Noise reduction
- 12 dB (A)
- Insulation material
- EPDM rubber
- Description
- Galvanised roll connector for medium-duty heating and refrigeration applications
- Material composition
- S235JRG - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Accessories for injectable mortars, including piston plugs and extension hoses
No technical data available
- Description
- Collated Clean-Tec cartridges for use with powder actuated nailers
- For use with (tools)
- DX 2, DX 351, DX 351 CT, DX 351 M/E, DX 351 MX 27, DX 351 MX 32, DX 36, DX 450, DX 460 F10, DX 460 F8, DX 460 F8S12, DX 460 FP8, DX 460 GR, DX 460 IE, DX 460 IE-XL, DX 460 MX, DX 460 MX, DX 460 SM, DX 460 SR, DX 462 CM, DX 462 CM, DX 462 F8, DX 462 F8S12, DX 5 F10, DX 5 F10 PTR, DX 5 F8, DX 5 F8S12, DX 5 GR, DX 5 IE, DX 5 IE-XL, DX 5 MX, DX 5 MX, DX 5 SM, DX A40, DX A41
- Cartridge type
- 6.8/11 M10
- Cartridge strip capacity
- 10
- Description
- Gas can for use with the GX 120 gas nailer
- For use with (tools)
- GX 120, GX 120-ME
- Substances contained
- i-buthene, propene, propane
- Storage temperature - min.
- 5 °C
- Description
- Wedge compression kit for quickly and easily forming a tight, effective seal within cable transit frames
- Approvals
- UL
- Storage and transportation temperature range
- 5 - 25 °C
- Application temperature range
- -20 - 50 °C
- Description
- High-performance wedge anchor (M8-M16) for static and seismic loads in cracked concrete (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Externally threaded
- Installation tools
- TE 6-22 Cordless rotary hammer, SIW 4AT-22 ½” Cordless impact wrench, SIW 6AT-22 Mid-Torque impact wrench
New
premium
- Description
- Premium bimetal hole saw for cutting steel and non-ferrous metal
- Base material
- Metal, Steel, Non-ferrous metal, Aluminium, Unalloyed steel
- Working mode
- Drilling
- Connection end
- Smooth shank
premium
- Description
- Arbor with pilot bit for use with Premium MultiCut hole saws
- Hole saw type
- MultiCut hole saw
- Base material
- Multiple materials, Metal, Wood, Plastic, Drywall
- Working mode
- Drilling
premium
- Description
- Arbor with pilot bit for use with Premium MetalCut hole saws
- Hole saw type
- MetalCut hole saw
- Base material
- Metal, Steel, Non-ferrous metal, Aluminium, Unalloyed steel
- Working mode
- Drilling
New
ultimate
- Description
- Ultimate tile drill bit for drilling in tiles with angle grinders
- Base materials
- Tiles, Natural stone
- Connection end
- M14
- Tool type
- Angle grinder
- Description
- Bimetal reciprocating saw blades for cutting metal, wood and other materials
- Product class
- Standard
- Shank
- 1/2" universal shank
- Teeth per inch
- 10-14
premium
- Description
- Premium circular saw blade for straight, fast, cold cutting in metal
- Blade features
- Cold cut, Long life, Precise cut, Straight cut, Carbide tipped
- Blade diameter
- 165 mm
- Number of teeth
- 40
- Description
- Premium abrasive thin cutting disc for fast cutting with depressed centre
- Base material
- Steel
- Tool type
- Angle grinder
- Disclaimer
- Use angle grinder with double-sided guard
- Description
- Professional-performance screwdriver bit with torsion zone for soft joint applications
- Feature
- Torsion bits
- Connection end
- 1/4 in hexagonal
- Description
- Standard-performance bit holder with magnet for use with regular screwdrivers
- Feature
- Magnetic nutsetters
- Recess
- HEX1/4"
- Connection end
- 1/4 in hexagonal
ultimate
- Description
- 3/4" (inch) long impact sockets for tightening bolts and anchors
- Connection end
- 3/4 in square
- Short/long
- Long
- Product class
- Ultimate
ultimate
- Description
- 1/2" (inch) short impact socket for tightening bolts and anchors
- Connection end
- 1/2 in square
- Short/long
- Short
- Material coating/plating/finish
- Black phosphate
- Description
- Ultimate-performance pre-set undercut anchor for dynamic loads (stainless steel)
- Material, corrosion
- Stainless steel, A4
- Head configuration
- Externally threaded
- Approvals / test reports
- ETA, ICC-ES report (concrete), Nuclear (NQA-1), Seismic
- Description
- High-performance plastic anchor for frames (hot-dip galvanised, hex head)
- Base materials
- Concrete (aerated), Concrete (cracked), Concrete (hollow core), Concrete (uncracked), Masonry (grout-filled CMU), Masonry (hollow), Masonry (solid)
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire
- Description
- Ultimate-performance foil adhesive capsule for heavy-duty anchoring in concrete
- Approvals / test reports
- ETA, Fire
- Base material condition
- Dry, Wet
- PROFIS software
- Yes
- Description
- Self-drilling screw without washer for quickly connecting overlapping metal sheets
- Screw drive/recess type
- Hexagon 8
- Base materials
- Carbon steel
- Environmental conditions
- Dry indoor
- Description
- Single drywall screws (phosphate-coated) for fastening drywall boards to metal
- Screw head type
- Bugle head
- Environmental conditions
- Dry indoor
New
standard
- Description
- Premium collated nails for fastening to concrete using powder-actuated tools
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
- Description
- Checker plate fastener disc for threaded studs in highly corrosive environments
- Application
- Grating
- Approvals
- ABS, LR
- For use with (tools)
- BX 3, DX 351
New
ultimate
- Description
- Threaded stud for electrical connectors on steel in highly corrosive environments
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Corrosion protection equivalent to A4(316)
- Description
- Checker plate fastener disc for threaded studs in mildly corrosive environments
- Application
- Grating
- Approvals
- ABS
- For use with (tools)
- BX 3, DX 351
premium
- Description
- Ceiling clip with pre-mounted, premium nail for fastening to concrete
- Material
- Carbon steel
- Base materials
- Concrete (soft), Concrete (tough), Concrete (lightweight)
- Environmental conditions
- Dry indoor
- Description
- hot-dip galvanised (HDG) C-Channel profile for light-duty applications
- Height
- 20.6 mm
- Material thickness
- 2 mm
- Material composition
- S235JR - DIN EN 10025
- Description
- hot-dip galvanised (HDG) C-Channel profile for medium-duty applications
- Height
- 41.3 mm
- Material thickness
- 2 mm
- Material composition
- S235JR - DIN EN 10025
- Description
- Stainless steel (A2) C-Channel profile for light-duty applications
- Height
- 20.6 mm
- Material thickness
- 2 mm
- Material composition
- Stainless steel, 1.4301 (A2) - EN 10088
- Description
- hot-dip galvanised (HDG) C-Channel profile for medium-duty applications
- Height
- 52 mm
- Material thickness
- 2.5 mm
- Material composition
- S235JR - DIN EN 10025
- Description
- hot-dip galvanised (HDG) C-Channel profile for medium-duty applications
- Height
- 72 mm
- Material thickness
- 2.75 mm
- Material composition
- S235JR - DIN EN 10025
- Description
- Galvanised channel connector for joining any elements with a butterfly opening
- Product class
- Premium
- Tightening torque
- 40 Nm
- Material composition
- Bolt: grade 8.8 - DIN EN ISO 898, Nut: QStE 380 TM, SEW 92, Plate: DD11 - DIN EN 10111
- Description
- Seismic hinge connectors for bracing the strut channels against lateral loads
- Material composition
- Carbon steel
- Surface finish
- Indoor Coated - Electro galvanised
- Base material type
- Steel
- Description
- hot-dip galvanised (HDG) C-Channel bracket for medium-duty applications
- Material thickness
- Channel: 2 mm, Baseplate: 6 mm
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Description
- hot-dip galvanised (HDG) C-Channel bracket for medium-duty applications
- Material thickness
- Channel: 2 mm, Baseplate: 8 mm
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Description
- Stainless steel (A4) C-Channel bracket for medium-duty applications
- Material thickness
- Channel: 2 mm, Baseplate: 8 mm
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanised pipe clamp without sound insulation for extra heavy-duty applications
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised double roll connector for heavy-duty heating and refrigeration applications
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised roll connector for medium/heavy-duty heating and refrigeration applications
- Material composition
- S235JRG - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Self-expanding polyurethane foam sealant ideal for filling, sealing and insulating
- Foam yield (up to)
- 50 l
- Application temperature range
- 5 - 30 °C
premium
- Description
- Stepper bit for drilling or enlarging holes of different sizes in metal
- Connection end
- Cylindrical
- Base material
- Metal, Steel
- Application
- Drilling, Enlarging holes
- Description
- Arbor with pilot bit for use with Ultimate carbide tipped hole saws
- Hole saw type
- Carbide tipped hole saw
- Base material
- Multiple materials, Drywall, Metal, Stainless steel, Wood, Plastic, Tiles, Non-ferrous metal, Masonry
- Working mode
- Drilling
New
ultimate
- Description
- Ultimate auger bit for fast, smooth drilling of deep holes in wood
- Connection end
- 7/16 in hexagonal
- Base material
- Wood
- Working mode
- Drilling
ultimate
- Description
- Ultimate tile drill bit for drilling in tiles with an angle grinder
- Base materials
- Tiles, Natural stone
- Connection end
- M14
- Tool type
- Angle grinder
New
ultimate
- Description
- Ultimate tile drill bit for drilling in tiles with cordless drill drivers
- Base materials
- Tiles, Natural stone
- Connection end
- Hexagonal
- Tool type
- Cordless drill driver
ultimate
- Description
- Self-sharpening Hex 28 pointed chisel bits for demolishing concrete and masonry
- Connection end
- TE-H28 (HEX 28)
- Product class
- Ultimate