Search Results
1104
Products for "MT modular supports system for raised floor soluti"
Filter
- Description
- Self-drilling screw (A2 stainless steel) with 16 mm washer for thin metal-to-metal fastenings (up to 2mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 16 mm
- Base materials
- Carbon steel, Aluminium
- Description
- Self-drilling screw (zinc-plated carbon steel) with 16 mm washer for thick metal-to-metal fastenings (up to 15mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 16 mm
- Base materials
- Carbon steel
- Description
- Self-drilling screw (zinc-plated carbon steel) with 16 mm washer for thick metal-to-metal fastenings (up to 15 mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 16 mm
- Base materials
- Carbon steel
- Description
- Sharp-tipped, narrow letter and number characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Sharp
- Description
- Round-tipped, narrow letter and number characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Low stress
- Description
- Self-drilling pan head screw (A2 stainless steel) with 12 mm washer for medium-thick metal-to-metal fastenings (up to 5.5 mm)
- Screw drive/recess type
- TX 25
- Washer size
- 12 mm
- Base materials
- Carbon steel, Aluminium
- Description
- Stainless steel pipe clamp saddle for connecting threaded components to MQ strut channels
- Material composition
- Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) – EN 10088, AISI 316L, Plastic: PB
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Ultimate-performance screw anchor for quicker permanent fastening in concrete (carbon steel, hex head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire, Seismic, VDS
New
ultimate
- Description
- Threaded screw-in stud (carbon steel, Metric or Whitworth thread) for multi-purpose fastenings on steel in mildly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Duplex coating, equivalent to 45 µm hot-dip galvanised
- Description
- Ultimate-performance screw anchor for quicker permanent and temporary fastening in concrete (carbon steel, countersunk head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Countersunk Torx
- Approvals / test reports
- ETA, Fire, Seismic
- Description
- Ultimate-performance screw anchor for quicker permanent and temporary fastening in concrete (carbon steel, hex head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire, Seismic
- Description
- Ultimate-performance screw anchor for quicker permanent fastening in concrete (A4 stainless steel, hex head)
- Material, corrosion
- Stainless steel, A4
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire, Seismic
- Description
- Ultimate-performance screw anchor for quicker permanent and temporary fastening in concrete (multilayer corrosion protection, hex head)
- Material, corrosion
- Carbon steel, multilayer coating
- Head configuration
- Hex head
- Approvals / test reports
- DIBt, ETA, Fire, Seismic
- Description
- High-performance plastic anchor for frames (A4 stainless steel, hex head)
- Base materials
- Concrete (aerated), Concrete (cracked), Concrete (hollow core), Concrete (uncracked), Masonry (grout-filled CMU), Masonry (hollow), Masonry (solid)
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire
- Description
- High-performance collared plastic anchor for frames (carbon steel, hex head)
- Base materials
- Concrete (aerated), Concrete (cracked), Concrete (hollow core), Concrete (uncracked), Masonry (grout-filled CMU), Masonry (hollow), Masonry (solid)
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire
- Description
- Self-drilling screw (A2 stainless steel) with washer for thin-medium metal-to-metal fastenings (up to 4 mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 14 mm, 16 mm, 19 mm, 22 mm
- Base materials
- Carbon steel, Aluminium
- Description
- Self-drilling screw (zinc-plated carbon steel) without washer for thick metal-to-metal fastenings (up to 15 mm)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Carbon steel
- Environmental conditions
- Dry indoor
- Description
- hot-dip galvanised (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition
- Steel grade 8.8
- Surface finish
- HDG: 45 µm - DIN EN ISO 10684
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Self-drilling screw (zinc-plated carbon steel) without washer for thin metal-to-metal fastenings (up to 3 mm)
- Screw drive/recess type
- Hexagon head
- Base materials
- Carbon steel
- Environmental conditions
- Dry indoor
- Description
- Self-drilling screw (zinc-plated carbon steel) without washer for medium-thick metal-to-metal fastenings (up to 6 mm)
- Screw drive/recess type
- Hexagon head
- Base materials
- Carbon steel
- Environmental conditions
- Dry indoor
- Description
- Self-drilling screw (A2 stainless steel) without washer for thick metal-to-metal fastenings (up to 15 mm)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Carbon steel, Aluminium
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor with low pollution, Outdoor with moderate concentration of pollution
- Description
- Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal
- Screw head type
- Bugle head
- Product class
- Premium
- Environmental conditions
- Dry indoor
premium
- Description
- Threaded stud for grating and multi-purpose fastenings on steel in mildly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Sealing for the DD-WC-S water dam for core bit diameters from 8 mm (5/16") to 87 mm (3-7/16")
- Accessory type
- Sealing washers
- For use with
- DD 120, DD 150-U, DD 160, DD 200, DD 250, DD 350-CA, DD 500-CA
- Description
- Sealing for the DD-WC-SM water dam for core bit diameters from 24 mm (15/16") to 162 mm (6 3/8")
- Accessory type
- Sealing washers
- For use with
- DD 120, DD 150-U, DD 160, DD 200, DD 250, DD 350-CA, DD 500-CA
- Description
- Connector (concrete) for installing MI girders between two walls
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque
- 84 Nm
New
ultimate
- Description
- Threaded stud for fastenings on coated steel
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Equivalent to A4 (316) stainless steel
- Description
- hot-dip galvanised (HDG) pipe clamp with sound insulation for economical light/medium-duty applications
- Noise reduction
- 16 dB (A)
- Temperature resistance
- -40 - 110 °C
- Material composition
- SPCC-SD FB - Q/BQB402, DC01 – EN 10130
- Description
- Galvanized 90-degree angle for connecting multiple MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Number of holes
- 4
- Description
- Galvanised 90-degree angle for connecting multiple MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Number of holes
- 3
- Description
- Galvanised 90-degree angle for connecting multiple MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Number of holes
- 8
- Description
- Galvanised ventilation pipe clamp with sound insulation for high productivity in spiral duct applications
- Approvals
- Fire class B2
- Temperature resistance
- -40 - 110 °C
- Material composition
- DD11 - DIN EN 10111
- Description
- High-performance plastic frame anchor (carbon steel, countersunk head)
- Base materials
- Concrete (aerated), Concrete (cracked), Concrete (hollow core), Concrete (uncracked), Masonry (grout-filled CMU), Masonry (hollow), Masonry (solid)
- Head configuration
- Countersunk
- Approvals / test reports
- ETA, Fire, Fire (For more details please check the fire approval)
- Description
- Galvanised pivot anchors for use in trapezoidal metal sheets
- Material composition
- Carbon steel
- Surface finish
- Indoor Coated - Electro galvanised
- Base material type
- Trapezoidal sheet
- Description
- Galvanised base plate for connecting threaded components to MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Stainless steel clamp for fastening one MQ strut channel to another
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Galvanised double slide connector for light-duty heating and refrigeration applications
- Material composition
- S235JRG - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
ultimate
- Description
- Threaded stud for multi-purpose fastenings on steel in highly corrosive environments
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Galvanised 90-degree preassembled angle for connecting multiple MM strut channels
- Product class
- Ultimate
- Material composition
- DC04 - DIN EN 10130
- Surface finish
- Indoor Coated - Electro galvanised
ultimate
- Description
- Threaded stud for grating and multi-purpose fastenings on steel in highly corrosive environments
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Galvanised flat channel connector used as a longitudinal extender for MQ channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised clamp for cross-connection of one MQ strut channel to another
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Channel end cap for covering the ends of Hilti MQ strut channels
- Material composition
- Plastic component: polypropylene
- Surface finish
- n/a
- Material thickness
- 4 mm
- Description
- Channel end cap for covering the ends of Hilti MM strut channels
- Material composition
- Polypropylene (PP)
- Surface finish
- n/a
- Description
- Galvanised 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised beam clamp for connecting MM strut channels directly to steel beams
- Material composition
- EN-GJMB-550-4 - DIN EN 1562
- Surface finish
- Galvanized
- Description
- Galvanised beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025, Nut - DIN 50961
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Hot-dip galvanised (HDG) clamp for fastening MQ strut channels to concrete
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) connector for fastening U-bolts to MI girders
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Washer: DIN EN ISO 7089; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: connector, square washer 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to concrete for heavy-duty applications
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised 90-degree pre-assembled angle for connecting multiple MQ strut channels
- Wrench size
- 17 mm
- Material composition
- Angle: DD11 - DIN EN 10111, Bolt: M10 grade 8.8 - DIN ISO 898
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised flat T channel connector for fastening two MQ strut channels together
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
New
ultimate
- Description
- Threaded stud for fastening grating and checker plate to steel
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Corrosion protection equivalent to A4(316)
- Description
- Galvanised flexible channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- S235JRG2 - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) 90-degree angle for connecting multiple MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm