Search Results
1087
Products for "MT modular supports system for raised floor soluti"
Filter
New
ultimate
- Description
- Threaded screw-in stud (carbon steel, metric thread) for grating fastenings on steel in mildly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Duplex coating, equivalent to 45 µm hot-dip galvanised
premium
- Description
- Carbon steel threaded stud for use with powder-actuated tools on steel (8 mm washer) – for indoor use only
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
New
ultimate
- Description
- Threaded screw-in stud (Stainless steel) for multi-purpose fastenings on steel in highly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Corrosion protection equivalent to A4(316)
New
ultimate
- Description
- Threaded screw-in stud (Stainless Steel, Metric thread) for grating fastenings on steel and aluminum in highly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Hot-dip galvanised (HDG) single beam clamp for connecting MIQ steel baseplates to steel beams
- Material composition
- Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
premium
- Description
- Carbon steel threaded stud for use with powder actuated nailers on steel (8 mm washer)
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 4 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
premium
- Description
- Carbon steel threaded stud for use with powder actuated nailers on steel (10 mm washer)
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
premium
- Description
- Carbon steel threaded stud for use with powder actuated nailers on steel (10 mm washer)
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
premium
- Description
- Carbon steel threaded stud for use with powder-actuated nailers on steel (10 mm washer)
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
- Description
- Stainless steel (A4) 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L, Nut: A4-70 - DIN EN ISO 3506-2
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 6 mm
- Description
- Hot-dip galvanised flat channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Stainless steel (A4) pipe clamp without sound insulation for light-duty applications
- Material composition
- Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Outdoor coated (OC) u-bolt for universal piping applications
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Stainless steel (A4) flexible channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Galvanised 90-degree heavy angle for connecting multiple MQ strut channels in medium/heavy-duty applications
- Material composition
- DD11 MOD – HN 555-4, S235JR – EN10025-2
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised flat washer corresponding to DIN 9021 used in various applications
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
New
ultimate
- Description
- Threaded screw-in stud (stainless steel, metric thread) for electrical connections on steel in highly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
New
ultimate
- Description
- Threaded screw-in stud (carbon steel, metric thread) for electrical connections on steel in mildly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Duplex coating, equivalent to 45 µm hot-dip galvanised
- Description
- Hot-dip galvanised (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition
- Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Spring: EN 10270-3
- Surface finish
- HDG: 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Setting tool for internally threaded sleeves
No technical data available
- Description
- Galvanised pipe clamp with high temperature resistance inlay for heavy-duty applications
- Noise reduction
- 23 dB (A)
- Temperature resistance
- -60 - 200 °C
- Material composition
- S235JRG - DIN EN 10025
ultimate
- Description
- Torque-controlled socket wrench for setting HSA anchors
- Connection end
- 1/2 in square
New
standard
- Description
- Standard HSS roll-forged drill bit for drilling small holes into steel ≤400 N/mm², similar to DIN 338 / 340
- Product class
- Standard
- Connection end
- Smooth shank
- DIN
- DIN 338
- Description
- Setting tool for capsule anchor rods with conical heads
No technical data available
- Description
- Galvanised pipe clamp with load sharing for refrigeration applications with a variety of insulation thicknesses
- Approvals
- Fire class B2
- Temperature resistance
- -70 - 120 °C
- Material composition
- Closed-cell CFC-free polyisocyanurate (PIR) foam, outside aluminium foil
- Description
- Galvanised u-bolt for universal piping applications
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised grade 8 hexagon nut corresponding to DIN 934
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Galvanised sprinkler loop hanger with VdS, FM and UL approvals for fire sprinkler applications
- Material composition
- DX51D Z275 - DIN EN 10327
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Standard galvanized pipe clamp without load sharing for refrigeration applications with a variety of insulation thicknesses
- Approvals
- Fire class B2
- Temperature resistance
- -70 - 120 °C
- Material composition
- Closed-cell CFC-free polyisocyanurate (PIR) foam, outside aluminium foil
- Description
- Screw magazine for collated screws from 9-57 mm long – for interior finishing applications
- Length
- 180 mm
- Magazine capacity
- 50
- Screw length - min.
- 14 mm
- Description
- Screw magazine for collated screws from 25-51 mm long – for interior finishing applications
- Length
- 193 mm
- Magazine capacity
- 25
- Screw diameter d
- 3.5 mm
- Description
- hot-dip galvanised (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors
- Material composition
- S235 - EN 10025-2
- Surface finish
- HDG: 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) 90-degree heavy angle for connecting multiple MQ strut channels in medium/heavy-duty applications
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) hexagon nut corresponding to DIN 934
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70
- Surface finish
- Outdoor Plus - Stainless Steel
New
ultimate
- Description
- Threaded screw-in stud (stainless steel, metric or Whitworth thread) for multi-purpose fastenings on steel in highly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
standard
- Description
- Set of standard HSS roll-forged drill bits for drilling small holes into steel ≤400 N/mm², similar to DIN 338 / 340
- Product class
- Standard
- Connection end
- Smooth shank
- DIN
- DIN 338
- Description
- Self-tapping screw (A2 stainless steel) with 16 mm washer for fastening on timber framing or thin steel/aluminium
- Screw drive/recess type
- Hexagon 3/8
- Washer size
- 16 mm
- Base materials
- Wood, Carbon steel, Aluminium
- Description
- Multi-voltage, multi-bay charger for all Hilti Li-ion batteries
- Battery System Compatibility
- 22 V, 36 V
- Output power
- 90 W
- Output current
- 4 A
New
ultimate
- Description
- Threaded screw-in stud (stainless steel, metric thread) for multi-purpose fastenings on aluminium in highly corrosive environments
- Base materials
- Aluminium
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Hot-dip galvanised (HDG) screw with an integrated toothed plate for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition
- Bolt: Steel grade 8.8; Tooth plate: S235 - EN 10025-2
- Surface finish
- HDG: 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Ultimate HSS cobalt drill bit for drilling small holes into steel and stainless steel ≤1100 N/mm², compliant with DIN 338 / 340
- Connection end
- Smooth shank
- DIN
- DIN 338
- Base material
- Metal, Stainless steel
- Description
- Set of premium HSS precision-ground drill bits for drilling small holes into steel ≤900 N/mm², compliant to DIN 338 / 340
- Connection end
- Smooth shank
- DIN
- DIN 338
- Base material
- Metal, Steel, Aluminium
ultimate
- Description
- Setting tool for short HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
- Description
- Ultimate-performance heavy-duty wedge anchor with approvals for safety-relevant applications in concrete (carbon steel, hex head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire, ICC-ES report (concrete), LABC, Nuclear (NQA-1), Seismic
- Description
- Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
- Additional accessory information
- Socket for tightening X-BT-MF M10 threaded studs
- Description
- Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
- Additional accessory information
- T-handle for tightening X-BT threaded studs
- Description
- Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
- Additional accessory information
- Torque tool for tightening X-BT threaded studs
New
ultimate
- Description
- Setting tool for long HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
New
ultimate
- Description
- Threaded screw-in stud (carbon steel, metric thread) for electrical connections on steel in mildly corrosive environments. Recommended maximal cross-section of connected cable: 120 mm²
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Duplex coating equivalent to 45 µm hot-dip galvanized
New
ultimate
- Description
- Threaded screw-in stud (stainless steel, metric thread) for electrical connections on steel in highly corrosive environments, recommended maximal cross section of connected cable 120 mm²
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Corrosion protection equivalent to A4(316)
- Description
- Tool to easily cut threaded rods of various diameters
- Material composition
- Steel
- Surface finish
- n/a
New
ultimate
- Description
- Threaded screw-in stud (Stainless steel, Metric thread) for electrical connections on steel in highly corrosive environments – Recommended maximal cross section of connected cable: 120 mm² / AWG 4.0
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Corrosion protection equivalent to A4(316)
- Description
- 5 Nm torque tool for installing S-BT threaded screw-in studs on aluminium or steel (thickness < 6 mm)
No technical data available
- Description
- BX 3-ME nailer accessories
- For use with (tools)
- BX 3-IF, BX 3-ME (02)
- Additional accessory information
- Magnetic washer holder for BX 3 for metal washers
- Description
- Premium SDS Plus (TE-C) hammer drill bit sets with different diameters and lengths
- Connection end
- TE-C (SDS-plus)
- Base material
- Concrete, Brick, Masonry, Sand-lime block
- Working mode
- Hammer drilling
- Description
- Hop-dip galvanised rigid strut clamp
- Material composition
- Clamp: Carbon steel – ASTM A1011 CS Type B, Clamping screw: 304 stainless steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)