Search Results
643
Products for "Explore the MT modular support system"
Filter
- Description
- Sharp-tipped, wide letter and number characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Sharp
- Description
- Round-tipped, wide letter and number characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Low stress
- Description
- Stop drill bit – required for installation of HDA undercut anchors
- Connection end
- TE-C (SDS-plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete
- Description
- Hot-dip galvanised (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications
- Material composition
- Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt 48 µm - DIN EN ISO 10684; Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Sharp-tipped, narrow letter and number characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Sharp
- Description
- Round-tipped, narrow letter and number characters for stamping identification markings onto metal
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Low stress
New
ultimate
- Description
- Threaded screw-in stud (carbon steel, Metric or Whitworth thread) for multi-purpose fastenings on steel in mildly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Duplex coating, equivalent to 45 µm hot-dip galvanised
- Description
- Stainless steel pipe clamp saddle for connecting threaded components to MQ strut channels
- Material composition
- Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) – EN 10088, AISI 316L, Plastic: PB
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to steel for heavy-duty applications
- Material composition
- Connector: S235 - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Self-drilling screw (A2 stainless steel) with washer for thin-medium metal-to-metal fastenings (up to 4 mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 14 mm, 16 mm, 19 mm, 22 mm
- Base materials
- Carbon steel, Aluminium
- Description
- Self-drilling screw (zinc-plated carbon steel) without washer for thick metal-to-metal fastenings (up to 15 mm)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Carbon steel
- Environmental conditions
- Dry indoor
- Description
- Self-drilling screw (zinc-plated carbon steel) without washer for thin metal-to-metal fastenings (up to 3 mm)
- Screw drive/recess type
- Hexagon head
- Base materials
- Carbon steel
- Environmental conditions
- Dry indoor
- Description
- hot-dip galvanised (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition
- Steel grade 8.8
- Surface finish
- HDG: 45 µm - DIN EN ISO 10684
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Self-drilling screw (zinc-plated carbon steel) without washer for medium-thick metal-to-metal fastenings (up to 6 mm)
- Screw drive/recess type
- Hexagon head
- Base materials
- Carbon steel
- Environmental conditions
- Dry indoor
- Description
- Self-drilling screw (A2 stainless steel) without washer for thick metal-to-metal fastenings (up to 15 mm)
- Screw drive/recess type
- Hexagon 8
- Base materials
- Carbon steel, Aluminium
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor with low pollution, Outdoor with moderate concentration of pollution
- Description
- Chucks and side handles for use with TE-C (SDS Plus) rotary hammers
- Chuck type
- Click chuck
- Additional accessory information
- Drilling in concrete and masonry
- Description
- Galvanised flexible channel connector for two-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised flexible channel connector for two-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised channel connector for three-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised channel connector for three-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- TE-Y adapter and side handles
- Additional accessory information
- Adapter for the TE-Y (SDS-Max) chuck to allow use of drill bits, chisels and other accessories with the TE-C (SDS-Plus) connection end
- Description
- Chucks and side handles for use with TE-C (SDS Plus) rotary hammers
- Chuck type
- Click chuck
- Additional accessory information
- Drilling in concrete and masonry
- Description
- Chucks and side handles for use with TE-C (SDS Plus) rotary hammers
- Chuck type
- Quick-release chuck
- Additional accessory information
- Drilling in wood or metal
- Description
- Galvanised flat washer corresponding to DIN 9021 used in various applications
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Chucks and side handles for use with TE-C (SDS Plus) rotary hammers
- Chuck type
- Click chuck
- Additional accessory information
- Drilling in concrete and masonry
- Description
- Economical sleeve anchor (tie wire)
- Head configuration
- Tie wire
- Environmental conditions
- Indoor, dry conditions
- Approvals / test reports
- N/A
- Description
- Galvanised grade 8 hexagon nut corresponding to DIN 934
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Stainless steel (A4) hexagon nut corresponding to DIN 934
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Chucks and side handles for use with TE-C (SDS Plus) rotary hammers
- Chuck type
- Angular chuck
- Dimensions (LxWxH)
- 152 x 80 x 135 mm
- Additional accessory information
- Drilling in concrete and masonry
- Description
- Chucks and side handles for use with TE-C (SDS Plus) rotary hammers
- Chuck type
- Angular chuck
- Dimensions (LxWxH)
- 152 x 80 x 137 mm
- Additional accessory information
- Drilling in concrete and masonry
- Description
- Chucks and side handles for use with TE-C (SDS Plus) rotary hammers
- Chuck type
- Adapter
- Additional accessory information
- Adapting a chuck to a tool with TE-C (SDS Plus) connection
- Description
- Chucks and side handles for use with TE-C (SDS Plus) rotary hammers
- Chuck type
- n/a
premium
- Description
- Threaded stud for grating and multi-purpose fastenings on steel in mildly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- hot-dip galvanised (HDG) pipe clamp with sound insulation for economical light/medium-duty applications
- Noise reduction
- 16 dB (A)
- Temperature resistance
- -40 - 110 °C
- Material composition
- SPCC-SD FB - Q/BQB402, DC01 – EN 10130
- Description
- Galvanised ventilation pipe clamp with sound insulation for high productivity in spiral duct applications
- Approvals
- Fire class B2
- Temperature resistance
- -40 - 110 °C
- Material composition
- DD11 - DIN EN 10111
New
ultimate
- Description
- Threaded stud for fastenings on coated steel
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Equivalent to A4 (316) stainless steel
- Description
- Galvanized 90-degree angle for connecting multiple MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Number of holes
- 4
- Description
- Galvanised 90-degree angle for connecting multiple MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Number of holes
- 8
- Description
- Galvanised 90-degree angle for connecting multiple MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Number of holes
- 3
- Description
- Tool to easily cut threaded rods of various diameters
- Material composition
- Steel
- Surface finish
- n/a
ultimate
- Description
- Threaded stud for grating and multi-purpose fastenings on steel in highly corrosive environments
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
ultimate
- Description
- Threaded stud for multi-purpose fastenings on steel in highly corrosive environments
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Galvanised double slide connector for light-duty heating and refrigeration applications
- Material composition
- S235JRG - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised base plate for connecting threaded components to MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Stainless steel clamp for fastening one MQ strut channel to another
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Galvanised 90-degree preassembled angle for connecting multiple MM strut channels
- Product class
- Ultimate
- Material composition
- DC04 - DIN EN 10130
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- BX 3-ME nailer accessories
- For use with (tools)
- BX 3-IF, BX 3-ME (02)
- Additional accessory information
- Magnetic washer holder for BX 3 for metal washers
- Description
- Chucks and side handles for use with TE-C (SDS Plus) rotary hammers
- Chuck type
- Quick-release chuck 13 mm
- Additional accessory information
- Drilling in wood or metal
- Description
- Galvanised pivot anchors for use in trapezoidal metal sheets
- Material composition
- Carbon steel
- Surface finish
- Indoor Coated - Electro galvanised
- Base material type
- Trapezoidal sheet
- Description
- Ultimate-performance screw anchor for quicker permanent fastening in concrete (carbon steel, internally multi-threaded head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Inner thread
- Approvals / test reports
- ETA, Fire, VDS
- Description
- Galvanised clamp for cross-connection of one MQ strut channel to another
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025, Nut - DIN 50961
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised beam clamp for connecting MM strut channels directly to steel beams
- Material composition
- EN-GJMB-550-4 - DIN EN 1562
- Surface finish
- Galvanized
- Description
- Hot-dip galvanised (HDG) clamp for fastening MQ strut channels to concrete
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) connector for fastening U-bolts to MI girders
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Washer: DIN EN ISO 7089; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: connector, square washer 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised 90-degree pre-assembled angle for connecting multiple MQ strut channels
- Wrench size
- 17 mm
- Material composition
- Angle: DD11 - DIN EN 10111, Bolt: M10 grade 8.8 - DIN ISO 898
- Surface finish
- Indoor Coated - Electro galvanised