Standard hardware for piping supports

AM

Threaded rod 4.8

• Material composition: Steel grade 4.8 - DIN 976-1
• Surface finish: Galvanized

From OMR 0.900

Compare (1)

r1351

Hexagon nut grade 8 DIN 934

• Material composition: Steel grade 8
• Surface finish: Galvanized

From OMR 0.030

Compare (1)

r6201294

Galvanised grade 8 hexagon nut corresponding to DIN 934

• Material composition: Steel grade 8
• Surface finish: Galvanized

From OMR 0.010

Compare (1)

r4173

Galvanized eye nut corresponding to DIN 582 with looped heads to receive a hook

• Material composition: Steel C15E
• Surface finish: Galvanized

From OMR 2.010

Compare (1)

r6201343

Galvanised flat washer corresponding to DIN 125 used in various applications

• Surface finish: Galvanized

From OMR 0.010

Compare (1)

r6201341

Galvanised flat washer corresponding to DIN 9021 used in various applications

• Surface finish: Galvanized

From OMR 0.020

Compare (1)

r6021

Galvanized flat washer corresponding to ISO 7089 used in various applications

• Material composition: Steel - DIN EN ISO 7089
• Surface finish: Galvanized

From OMR 0.020

Compare (1)

r6022

Flat washer similar to ISO 7089

• Material composition: Steel
• Surface finish: Galvanized
• Load range: Medium-duty

From OMR 0.050

Compare (1)

HDG Spring washer

Hot-dip galvanized (HDG) spring washer corresponding to DIN 127 used in various applications

• Surface finish: Hot-dip galvanized
• Inside diameter - DI: 10.2 mm
• Outside diameter - DA: 18.1 mm

OMR 0.020

Compare (1)

r1230848

Galvanized hexagon screw corresponding to DIN 931

• Thread - M: M10
• Material composition: Steel grade 8.8
• Surface finish: Electrogalvanized

OMR 0.310

Compare (1)

r1349

Galvanized hexagon screw corresponding to DIN 933

• Material composition: Steel grade 8.8
• Surface finish: Galvanized
• Load range: Medium-duty

From OMR 0.040

Compare (1)

r6201339

Hot-dip galvanised (HDG) hexagon screw corresponding to DIN 933

• Material composition: Steel grade 8.8
• Surface finish: Hot-dip galvanized
• Thread length - L: 25 mm

From OMR 0.040

Compare (1)

r6201338

Galvanised hexagon screw corresponding to DIN 933

• Material composition: Steel grade 8.8
• Surface finish: Galvanized

From OMR 0.040

Compare (1)

AM threaded rod - Steel grade 4.8 (HDG)

Hot-dip galvanised (HDG) threaded rod with 4.8 steel grade

• Material composition: Steel grade 4.8
• Surface finish: Hot-dip galvanized
• Base material type: n/a

From OMR 2.530

Compare (1)

r2955

Hot-dip galvanized (HDG) grade 8 hexagon nut corresponding to DIN 934

• Material composition: Steel grade 8
• Surface finish: Hot-dip galvanized - DIN EN ISO 10684
• Base material type: n/a

From OMR 0.040

Compare (1)

r6201295

Hot-dip galvanised (HDG) grade 8 hexagon nut corresponding to DIN 934

• Material composition: Steel grade 8
• Surface finish: Hot-dip galvanized

From OMR 0.030

Compare (1)

r1230929

Hot-dip galvanized (HDG) hexagon screw corresponding to DIN 931

• Material composition: Steel grade 8.8
• Surface finish: Hot-dip galvanized
• Load range: Medium-duty

From OMR 0.330

Compare (1)

r6201344

Hot-dip galvanised (HDG) flat washer corresponding to DIN 125 used in various applications

• Surface finish: Hot-dip galvanized

From OMR 0.010

Compare (1)

r6201342

Hot-dip galvanised (HDG) flat washer corresponding to DIN 9021 used in various applications

• Surface finish: Hot-dip galvanized

From OMR 0.040

Compare (1)

r6004

Hot-dip galvanized (HDG) flat washer corresponding to ISO 7089 used in various applications

• Material composition: Steel - DIN EN ISO 7089
• Surface finish: Hot-dip galvanized

From OMR 0.030

Compare (1)

r1230973

Hot-dip galvanized (HDG) flat washer similar to ISO 7089 used in various applications

• Material composition: Steel
• Surface finish: Hot-dip galvanized
• Inside diameter - DI: 10.5 mm

OMR 0.070

Compare (1)

r3499

Stainless steel (A4) hexagon nut corresponding to DIN 934

• Required material grade: A2, A4
• Material composition: Stainless steel A4-70
• Surface finish: Stainless steel

From OMR 0.110

Compare (1)

r6105

Stainless steel (A4) flat washer corresponding to ISO 7089 used in various applications

• Required material grade: A2, A4
• Material composition: Stainless steel A4 – DIN EN ISO 7089
• Surface finish: Stainless steel

From OMR 0.060

Compare (1)

A2 hexagon screw DIN 933

Stainless steel (A2) hexagon screw corresponding to DIN 933

• Required material grade: A2
• Material composition: Stainless steel A2-70
• Surface finish: Stainless steel

From OMR 0.140

Compare (1)

r4284

Stainless steel (A4) hexagon screw corresponding to DIN 933

• Required material grade: A4
• Material composition: Stainless steel A4-70 - DIN EN ISO 3506-1
• Surface finish: Stainless steel

From OMR 0.460

Compare (1)

r2954

Hot-dip galvanized (HDG) hexagon screw corresponding to DIN 933

• Material composition: Steel grade 8.8
• Surface finish: Hot-dip galvanized
• Load range: Medium-duty

From OMR 0.100

Compare (1)

r597

Galvanized hexagonal spacer coupling for extending threaded rods

• Material composition: Steel grade 4.6
• Surface finish: Galvanized

From OMR 0.120

Compare (1)

r1352

Spacer coupling, round

• Material composition: Steel
• Surface finish: Galvanized

From OMR 0.110

Compare (1)

r6096

Stainless steel (A4) spacer coupling for extending threaded rods

• Required material grade: A2, A4
• Material composition: Stainless steel A4-70
• Surface finish: Stainless steel

From OMR 2.670

Compare (1)

r2956

Hot-dip galvanized (HDG) spacer coupling for extending threaded rods

• Material composition: Steel grade 4.6
• Surface finish: Hot-dip galvanized
• Base material type: n/a

From OMR 0.250

Compare (1)

MF-SKD

Galvanised pivot anchors for use in trapezoidal metal sheets

• Approvals: FM approved
• Thread - M: M10
• Material composition: Carbon steel

OMR 3.050

Compare (1)

NK-M/MRC

Tool to easily cut threaded rods of various diameters

• Thread - M: M8, M10
• Material composition: Steel
• Surface finish: Painted

OMR 506.210

Compare (1)