Search Results
1087
Products for "MT modular supports system for raised floor soluti"
Filter
- Description
- hot-dip galvanised (HDG) hexagon nut with self-locking mechanism used with all MI connectors
- Material composition
- Steel grade 8
- Surface finish
- HDG: 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised grade 8 hexagon nut corresponding to DIN 934
- Material composition
- Steel grade 8
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Medium-duty
ultimate
- Description
- Ultimate diamond core bits – multipack in 6, 8 and 10 mm diameters
- Base materials
- Tile, Natural stone
- Connection end
- Hexagonal
- Tool type
- Cordless drill driver
- Description
- High-performance wedge anchor for everyday static in uncracked concrete (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Externally threaded
- Approvals / test reports
- ETA
ultimate
- Description
- Ultimate HEX tile drill bits in a set of 6, 8 and 10 mm diameter
- Base materials
- Tiles, Natural stone
- Connection end
- Hexagonal
- Tool type
- Cordless drill driver
- Description
- Galvanised flat washer corresponding to DIN 125 used in various applications
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Hot-dip galvanised (HDG) flat washer corresponding to DIN 125 used in various applications
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light-duty
- Description
- hot-dip galvanised (HDG) grade 8 hexagon nut corresponding to DIN 934
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light-duty
- Description
- Standard core bit for coring in very abrasive concrete – for all tools
- For use with
- DD 160, DD 200, DD 350-CA
- Base materials
- Concrete (abrasive)
- Drilling mode
- Rig-mounted
- Description
- Stepped drill bit for pre-drilling holes for new-generation X-BT fasteners
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 8 mm
- Description
- Ultimate core bit for coring in very abrasive concrete – for <2.5 kW tools
- Base materials
- Concrete (abrasive)
- Drilling mode
- Rig-mounted
- Wet or dry operation
- Wet
- Description
- Premium core bit for coring in very abrasive concrete – for ≥2.5 kW tools
- Base materials
- Concrete (abrasive)
- Drilling mode
- Rig-mounted
- Wet or dry operation
- Wet
- Description
- Accessory for impact sockets
- Connection end
- 3/8 in square, 3/4 in square, 1/4 in hexagonal, 7/16 in hexagonal
- Short/long
- Long
- Material coating/plating/finish
- Black phosphate
ultimate
- Description
- Specialised arbors for Hilti hole saws including versions for rotary hammers, large diameters or tight spaces
- Base material
- Multiple materials
- Working mode
- Drilling
- Connection end
- No connection end
standard
- Description
- Standard diamond cup wheel for angle grinders – for faster grinding of concrete, screed and natural stone
- Tool type
- Cordless angle grinder, Corded angle grinder, Concrete grinder DGH 130
- Base material
- Concrete, Screed, Natural stone
- Product class
- Standard
ultimate
- Description
- Ultimate diamond cup wheel for angle grinders – for faster grinding of concrete, screed and natural stone
- Tool type
- Cordless angle grinder, Corded angle grinder, Concrete grinder DGH 130
- Base material
- Concrete, Screed, Natural stone
- Product class
- Ultimate
New
standard
- Description
- Standard diamond cup wheel for angle grinders – for faster grinding of concrete, screed and natural stone
- Tool type
- Cordless angle grinder, Corded angle grinder, Concrete grinder DGH 130
- Base material
- Concrete, Screed, Natural stone
- Product class
- Standard
ultimate
- Description
- Ultimate diamond finishing pads for the DGH 130 diamond grinder – for concrete finishing without scratch marks
- Tool type
- Concrete grinder DGH 130
- Base material
- Concrete, Screed, Natural stone
- Product class
- Ultimate
- Description
- Collated drywall screw (phosphate-coated) for the SMD 57 screw magazine – for fastening plasterboard to metal
- Screw head type
- Bugle head
- Environmental conditions
- Dry indoor
- Description
- Premium core bit for coring in very abrasive concrete – for <2.5 kW tools (without connection end)
- Base materials
- Concrete (abrasive)
- Drilling mode
- Rig-mounted
- Wet or dry operation
- Wet
- Description
- Ultimate core bit for coring in very abrasive concrete – for ≥2.5 kW tools (without connection end)
- For use with
- DD 200, DD 350-CA, DD 500-CA
- Base materials
- Concrete (abrasive)
- Drilling mode
- Rig-mounted
- Description
- Collated .27 calibre long Clean-Tec cartridges for use with powder-actuated nailers for fastening metal decks
- For use with (tools)
- DX 750, DX 76, DX 76 PTR
- Cartridge type
- .27 calibre long, 6.8/18 M10
- Approvals
- CE, CIP, PTB
- Description
- Economical plastic anchor for drywall
- Environmental conditions
- Indoor, damp conditions, Indoor, dry conditions, Outdoor
- Material composition
- Polyamide
- Type of fastening (global)
- Through-fastening, Pre-fastening
- Description
- Galvanised angle brace for brackets
- Material thickness
- 3 mm
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised silencer for various applications
- Noise reduction
- 18 dB (A)
- Material composition
- DD11 - DIN EN 10111, EPDM
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Ultimate-performance heavy-duty expansion anchor (A4 SS)
- Material, corrosion
- Stainless steel, A4
- Head configuration
- Externally threaded
- Base materials
- Concrete (uncracked)
- Description
- Ultimate core bit for coring in all types of concrete – for <2.5 kW tools (without connection end)
- Base materials
- Concrete
- Drilling mode
- Rig-mounted
- Wet or dry operation
- Wet
- Description
- Premium core bit for coring in all types of concrete – for <2.5 kW tools (without connection end)
- Base materials
- Concrete
- Drilling mode
- Rig-mounted
- Wet or dry operation
- Wet
New
- Description
- Ultimate core bit for coring in all types of concrete – for ≥2.5 kW tools (without connection end)
- For use with
- DD 200, DD 350-CA, DD 500-CA
- Base materials
- Concrete
- Drilling mode
- Rig-mounted
New
- Description
- Premium core bit for coring in all types of concrete – for ≥2.5 kW tools (without connection end)
- Base materials
- Concrete
- Drilling mode
- Rig-mounted
- Wet or dry operation
- Wet
- Description
- Marking head for the DX 462 powder-actuated tool used for marking on cold and hot metal surfaces
- Application
- Marking cold steel, Marking hot steel
- Base materials
- Steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Description
- Collated drywall screw (phosphate-coated) for the SMD 57 screw magazine – for fastening plasterboard or hard boards to metal
- Screw head type
- Bugle head
- Product class
- Premium
- Environmental conditions
- Dry indoor
- Description
- Ceiling hanger for attaching threaded rod
- Material
- Carbon steel
- For use with (tools)
- DX 351, DX 460, DX 5, DX 6
- Base materials
- Concrete (soft), Concrete (tough), Steel
ultimate
- Description
- Shear connector for composite beam constructions
- Application
- Metal deck
- For use with (tools)
- DX 76
- Corrosion protection
- Galvanised zinc coated <20 µm
premium
- Description
- Steel washers for use with nails
- Application
- Water proofing, Fasten plastic, netting, etc., Wire mesh
- For use with (tools)
- BX 3, GX 120, GX 3
- Corrosion protection
- Galvanised zinc coated <20 µm
- Description
- Channel rubber inlays for sound insulation
- Material composition
- EPDM
- Surface finish
- n/a
- Temperature resistance
- -40 - 110 °C
- Description
- Channel rubber inlay for sound insulation
- Material composition
- EPDM
- Surface finish
- n/a
- Temperature resistance
- -40 - 110 °C
ultimate
- Description
- Ultimate diamond cup wheel for the DG/DGH 150 diamond grinder – for faster grinding of concrete, screed and natural stone
- Tool type
- Concrete grinder DG/DGH 150
- Base material
- Concrete, Screed, Natural stone
- Product class
- Ultimate
premium
- Description
- Premium diamond cup wheel for the DG/DGH 150 diamond grinder – for faster grinding of concrete, screed and natural stone
- Tool type
- Concrete grinder DG/DGH 150
- Base material
- Concrete, Screed, Natural stone
- Product class
- Premium
Nuron
- Description
- Compact charger for all Hilti Nuron batteries
- Battery System Compatibility
- Nuron
- Output power
- 90 W
- Output current
- 3.5 A
- Description
- Mixing paddle for use with drill drivers
- Type
- Mixer
- Connection end
- Hexagonal
- Base material
- Mortars
- Description
- Economical plastic anchor for frames (countersunk head)
- Head configuration
- Countersunk
- Approvals / test reports
- N/A
- Material, corrosion
- Carbon steel, Plastic
ultimate
- Description
- Sealing ring for checker plate fastener discs
- Application
- Grating
- Approvals
- ITB
- For use with (tools)
- BX 3, DX 351
- Description
- Galvanised channel connector for three-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised channel connector for three-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised silencer for use with compressive loads
- Material composition
- Connecting part: chromated galvanized steel, Insulation material: EPDM
- Resistance
- Sunlight, weathering, environmental influences
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Injectable mortar accessories for brushing and guiding
No technical data available
- Description
- Sleeves for fitting plugs to seal round cable/pipe penetrations – for use with CFS-T RR and CFS-T RRS plug seals
- Storage and transportation temperature range
- 5 - 25 °C
- Application temperature range
- 50 - -20 °C
Nuron
- Description
- High-speed charger for all Hilti Nuron batteries
- Battery System Compatibility
- Nuron
- Output power
- 240 W
- Output current
- 9.6 A
- Description
- Stop drill bit for HSC installation (TE-C)
- Connection end
- TE-C (SDS-plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete, Reinforced concrete
New
standard
- Description
- Diamond blade for cutting in different base materials
- Tool type
- Angle grinder, Gas saw
- Base material
- Masonry, Natural stone, Concrete, Concrete (reinforced)
- Product class
- Standard
premium
- Description
- Premium circular saw blade for universal wood cutting
- Blade features
- Universal, Economic, Straight cut
- Product class
- Premium
premium
- Description
- Premium abrasive thin cutting disc for fast cutting
- Base material
- Stainless steel, Steel
- Tool type
- Angle grinder
- Disclaimer
- Use angle grinder with double-sided guard
premium
- Description
- Longer-lasting reciprocating saw blades for cutting softwood
- Product class
- Premium
- Shank
- 1/2" universal shank
- Teeth per inch
- 6
- Description
- Economical wedge anchor for sealing applications in concrete
- Head configuration
- Flat head
- Environmental conditions
- Indoor, dry conditions
- Approvals / test reports
- ETA, Fire
- Description
- Economical injectable epoxy mortar for anchoring in concrete
- Base materials
- Concrete (non-cracked)
- Base material condition
- Dry, Wet
- Seismic loading
- No
- Description
- Single drywall screw for fastening plasterboard to metal
- Screw head type
- Bugle head
- Product class
- Standard
- Environmental conditions
- Dry indoor
- Description
- Preformed firestop blocks for sealing penetrations with cables
- Dimensions (LxWxH)
- 200 x 130 x 50 mm
- Base materials
- Concrete, Masonry, Gypsum board, Sandwich Panel, Multi
- LEED VOC
- 5 g/l
- Description
- Galvanised flexible channel connector for two-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised flexible channel connector for two-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm