Hilti WebsiteGives complete transparency and 24/7 convenienceView all website benefits

Threaded studs & standoffs

Show me versatile and time-saving threaded studs for fastening on concrete and steel – such as grating, earthing, light cable trays or multi-purpose fastenings

28 Products

Filter

New

L112185 (191951)
Description
Threaded stud for fastening grating and checker plate to steel
Base materials
Steel, Stainless steel, Cast iron
Minimum thickness of base material (steel)
8 mm
Corrosion protection
Corrosion protection equivalent to A4(316)

New

L113344 (195504)
Description
Threaded screw-in stud (carbon steel, metric thread) for electrical connections on steel in mildly corrosive environments. Recommended maximal cross-section of connected cable: 120 mm²
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Duplex coating equivalent to 45 µm hot-dip galvanized

New

S-BT-MF M10/15 AN 6, S-BT-MF W10/15 AN 6 (83251)


Description
Threaded screw-in stud (carbon steel, Metric or Whitworth thread) for multi-purpose fastenings on steel in mildly corrosive environments
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Duplex coating, equivalent to 45 µm hot-dip galvanised

New

L113342 (195502)


Description
Threaded screw-in stud (stainless steel, metric thread) for electrical connections on steel in highly corrosive environments, recommended maximal cross section of connected cable 120 mm²
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Corrosion protection equivalent to A4(316)
L147544 (2821121)
Description
Threaded screw-in stud (Stainless Steel, Metric or Whitworth thread) for electrical connections on steel in highly corrosive environments
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Stainless steel A4(316) or equivalent

New

S-BT-MR M8/7 SN 6, S-BT-GR M8/7 SN 6 (84704)


Description
Threaded screw-in stud (Stainless Steel, Metric thread) for grating fastenings on steel and aluminum in highly corrosive environments
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Stainless steel A4(316) or equivalent

New

S-BT-MF M8/7 AN 6, S-BT-GF M8/7 AN 6 (83246)


Description
Threaded screw-in stud (carbon steel, metric thread) for grating fastenings on steel in mildly corrosive environments
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Duplex coating, equivalent to 45 µm hot-dip galvanised

New

S-BT-MR M8/7 SN 6 (84706)


Description
Threaded screw-in stud (stainless steel, metric or Whitworth thread) for multi-purpose fastenings on steel in highly corrosive environments
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Stainless steel A4(316) or equivalent

New

L147542 (2821108)
Description
Threaded screw-in stud (stainless steel, metric thread) for electrical connections on steel in highly corrosive environments – recommended maximal cross-section of connected cable: 120 mm² / AWG 4.0
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Corrosion protection equivalent to A4(316)

New

S-BT-MR M8/7 SN 6 (84706)
Description
Threaded screw-in stud (stainless steel, metric thread) for multi-purpose fastenings on aluminium in highly corrosive environments
Base materials
Aluminium
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Stainless steel A4(316) or equivalent

New

L147545 (2821129)


Description
Threaded screw-in stud (multilayer coated carbon steel – corrosion protection comparable to HDG) for grating and multi-purpose fastenings on steel in mildly corrosive environments. Compatible with Hilti MT installation channels
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Duplex coating equivalent to 45 µm hot-dip galvanized

New

L147546 (2821137)


Description
Threaded screw-in stud (stainless steel) for grating and multipurpose fastenings on steel in highly corrosive environments. Compatible with Hilti MT installation channels
Base materials
Steel
Corrosion protection
Equivalent to A4 (316) stainless steel
Thread size
M8

New

L105328 (185625)


Description
Threaded screw-in stud (stainless steel, metric thread) for electrical connections on steel in highly corrosive environments
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Stainless steel A4(316) or equivalent

New

L147549 (2821167)


Description
Threaded screw-in stud (multilayer coated carbon steel – corrosion protection comparable to HDG) for multi-purpose fastenings on steel in mildly corrosive environments
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Duplex coating equivalent to 45 µm hot-dip galvanized

New

L105314 (185609)


Description
Threaded screw-in stud (carbon steel, metric thread) for electrical connections on steel in mildly corrosive environments
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Duplex coating, equivalent to 45 µm hot-dip galvanised

New

L147553 (2821198)


Description
Threaded screw-in stud (Stainless Steel) for multi-purpose fastenings on steel in highly corrosive environments
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Corrosion protection equivalent to A4(316)
L147545 (2821129)
Description
Threaded screw-in stud (multilayer coated carbon steel - corrosion protection comparable to HDG) for multi-purpose fastenings on steel in mildly corrosive environments
Base materials
Metal
Product class
Ultimate
X-BT M8-15-6 SN12-R Stainless steel threaded stud  adapted


Description
Threaded stud for grating and multi-purpose fastenings on steel in highly corrosive environments
Base materials
Steel, Stainless steel, Cast iron
Minimum thickness of base material (steel)
8 mm
Corrosion protection
Stainless steel A4(316) or equivalent

New

L112175 (191948)
Description
Threaded stud for fastenings on coated steel
Base materials
Steel, Stainless steel, Cast iron
Minimum thickness of base material (steel)
8 mm
Corrosion protection
Equivalent to A4 (316) stainless steel
L113344 (195504)
Description
Threaded screw-in stud (carbon steel, whitworth thread) for electrical connections on steel in highly corrosive environments, recommended maximal cross section of connected cable 4/0 AWG
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Duplex coating equivalent to 45 µm hot-dip galvanized

New

L112205 (191958)
Description
Threaded stud for electrical connectors on steel in highly corrosive environments
Base materials
Steel, Stainless steel, Cast iron
Minimum thickness of base material (steel)
8 mm
Corrosion protection
Corrosion protection equivalent to A4(316)
22226.eps
Description
Carbon steel threaded stud for use with powder-actuated tools on steel (8 mm washer) – for indoor use only
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Galvanised zinc coated <20 µm
X-ST-GR M8/5 P8 (78038)
Description
Threaded stud for grating and multi-purpose fastenings on steel in mildly corrosive environments
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Stainless steel A4(316) or equivalent
L012191.eps
Description
Carbon steel threaded stud for use with powder actuated nailers on steel (10 mm washer)
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Galvanised zinc coated <20 µm
13492.jpg
Description
Carbon steel threaded stud for use with powder actuated nailers on steel (10 mm washer)
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Galvanised zinc coated <20 µm
101112006.tif
Description
Carbon steel threaded stud for use with powder-actuated nailers on steel (10 mm washer)
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Galvanised zinc coated <20 µm
21724.tif
Description
Carbon steel threaded stud for use with powder actuated nailers on steel (8 mm washer)
Base materials
Steel
Minimum thickness of base material (steel)
4 mm
Corrosion protection
Galvanised zinc coated <20 µm
X-CRM8-9-12 P8 stainless steel stud standard
Description
Threaded stud for multi-purpose fastenings on steel (8 mm washer)
Base materials
Steel
Minimum thickness of base material (steel)
6 mm
Corrosion protection
Equivalent to A4 (316) stainless steel