System connectors and interfaces
Profile connectors and interfaces – baseplates, angle brackets, beam clamps, saddles and system nuts and bolts for connecting profiles and media in modular supports
197 Products
Filter
- Description
- Hot-dip galvanised (HDG) connector offering highest load capacity within the MI and MIQ modular system
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised, adjustable angle connector for the 90-degree attachment of MC-3D channels to one another indoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Electrogalvanized
- Material thickness
- 4 mm
- Description
- Galvanised, adjustable angle connector for the 90-degree attachment of MC-3D channels to one another outdoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) connector for fastening MC-3D installation channels to a concrete substructure or another channel outdoors – either perpendicularly or at an angle
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness
- 4 mm
- Description
- Galvanised connector for fastening MC installation channels perpendicularly to concrete substructures with higher load requirements indoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Electrogalvanized
- Description
- Hot-dip galvanised (HDG) connector for fastening MC installation channels perpendicularly to concrete substructures with higher load requirements outdoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Hot-dip galvanized, 56 µm - ASTM A153
- Description
- Hot-dip galvanised (HDG) wing nut for fastening threaded components/bolts to the open face of MC installation channels
- Material composition
- QStE 380 TM - SEW 092
- Surface finish
- Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223
- Description
- Hot-dip galvanised (HDG) angle connector for 90-degree attachment of MC-3D channels to one another with higher load requirements outdoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness
- 4 mm
- Description
- Galvanized perforated bands used in various applications
- Base material type
- Concrete
- Material composition
- DX51D+Z275-N-A - DIN EN 10346
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised light-duty base plate to fasten imperial threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Seismic hinge connectors for bracing the strut channels against lateral loads
- Material composition
- Carbon steel
- Surface finish
- Indoor Coated - Electro galvanised
- Base material type
- Steel
- Description
- Galvanised beam clamp for fastening threaded rods to steel girders without internal thread
- Base material type
- Steel
- Material composition
- EN-GJMB – EN 1562
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- T-head bolt for fastening connectors and other construction elements to MIQ girders
- Material composition
- Bolt: grade 8.8 - DIN EN ISO 898, Plastic: PBT
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Premium stainless steel base plate for light-duty fixed point applications (metric)
- Material composition
- Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Premium hot-dip galvanised (HDG) base plate for light-duty fixed point applications (metric)
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Premium hot-dip galvanised (HDG) 2-hole base plate for light-duty fixed point applications (metric)
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Standard hot-dip galvanised (HDG) connector for fastening MI girders to one another
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)