Hilti Website Update of quantity
Please note, the order volume has been updated. This is due to package and minimum order quantities.
Please note, the order volume has been updated to . This is due to package and minimum order quantities.
Move cursor over image to zoom.
Click on image to zoom.
Pump DSH-P
New productItem #2124505
Self-priming pump – used with a dust suppression system when wet cutting with petrol saws
- Accessory type: Pump DSH
- Additional accessory information: DSH-P technical dataWeight: 1.27kg (2.8lb)Dimensions: Pump overall: Ø=113mm (4.4’’) Pump body: Ø= 76mm (3.0’’) Height: H= 129mm (5.1’’)Max. suction lift: 1.5m (5 ft) with 3.0m (10ft) hoseMax. supply pressure: 6 bar (87 PSI)Hose length: 3.0m (10 ft)Max. hose length: 9.0m (30 ft) up to 1.5m suction liftTightening torque: 8.0 NmConsumption: 1.0 ltr/min (0.264 gallon/min)
Features & Applications
Features & Applications
Pump DSH-P #2124505
Features
- Provides independence from a pressurised water source
- No assistant required to suppress dust while cutting with petrol saws when you have no access to a pressurised water source
- Can be quickly and easily attached or detached from the DSH-P (only 3 screws)
- Fits all Hilti X-version petrol saws
Applications
- Laying paving: Cutting kerbstones and paving slabs to size
- Road construction: Perimeter cutting in asphalt and concrete
- Floor construction: Cutting expansion joints in fresh concrete
- Construction work: Cutting out openings in brick or concrete walls
- Masonry work: Cutting bricks and blocks to size