Hilti WebsiteGives complete transparency and 24/7 convenienceView all website benefits

Accessories for Fasteners

Setting tools, testers and other accessories for installing and inspecting anchor fasteners

45 Products

Filter
HIT-SZ Injection accessories
Description
Accessories for injectable mortars, including piston plugs and extension hoses
No technical data available
Mixer HIT-RE-M
Description
Mixers and extensions for injectable mortars
No technical data available
Blow-out gun G 1/4"
Description
Injectable mortar accessories for blowing out
No technical data available
Extension hose HIT-VL 16
Description
Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal
Plug Diameter
20 - 55 mm
Extension hose HIT-DL 10/0.8
Description
Injectable mortar accessories for blowing out
Length
800 mm
Blow-out pump
Description
Injectable mortar accessories for blowing out
No technical data available
Mixer HIT-M1 assy
Description
Mixers and extensions for injectable mortars
No technical data available
TE Setting adapter (HVU2)
Description
Setting adapter for capsule anchor rods with hexagon heads
No technical data available
TE-C HEX, TE-Y HEX Setting tool
Description
Setting tool for capsule anchor rods with hexagon heads
No technical data available
TE-C-E Setting tool
Description
Setting tool for capsule anchor rods with conical heads
No technical data available
TE-Y-HDA-ST Setting tool
Description
Setting tool – required for installation of HDA undercut anchors
No technical data available
Products in this group use a Hilti TE-Y type connection end (commonly called SDS-Max).
TE-Y-E Setting tool
Description
Setting tool for capsule anchor rods with Conical heads
No technical data available
HIS-S Setting tool
Description
Setting tool for internally threaded sleeves
No technical data available
HKD-TE-CX Setting tool (short)
Description
Setting tool for short HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
Connection end
TE-C (SDS-plus)
Base material
Reinforced concrete, Concrete
Working mode
Hammer drilling
Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).

New

HKD-TE-CX Setting tool (long)
Description
Setting tool for long HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
Connection end
TE-C (SDS-plus)
Base material
Reinforced concrete, Concrete
Working mode
Hammer drilling
Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).
TE-C-HSC-MW Setting tool
Description
Setting tool (HSC)
No technical data available
Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).
TE-C-HDA-ST Setting tool
Description
Setting tool – required for installation of HDA undercut anchors
No technical data available
Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).
Setting tool HSD-G M16 5/8"X65
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G M20 3/4"X80
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HPE-M 10/30
Description
Machine setting tool (HPD)
No technical data available
Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).
Setting tool HSD-G M10 3/8"x30
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G M6 1/4"X25
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G M8 5/16"X30
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-M M8 5/16"X30
Description
SDS-plus (TE-C) setting tool for drop-in anchors
No technical data available
Setting tool HSD-M M10 3/8"X40
Description
SDS-plus (TE-C) setting tool for drop-in anchors
No technical data available
Setting tool HSD-M M12 1/2"X50
Description
SDS-plus (TE-C) setting tool for drop-in anchors
No technical data available
Setting tool HSD-M M16 5/8"X65
Description
SDS-plus (TE-C) setting tool for drop-in anchors
No technical data available
Setting tool HHD-S
Description
Setting tool
No technical data available
Setting tool HSD-G M8 5/16"x40
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G M10 3/8"X40
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G M12 1/2"X50
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Socket wrench insert X-NSD 1/4"-16mm
Description
Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
Additional accessory information
Socket for tightening X-BT-MF M10 threaded studs
T-handle X-NSD 1/4"
Description
Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
Additional accessory information
T-handle for tightening X-BT threaded studs
Torque tool X-BT 1/4" - 8Nm
Description
Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
Additional accessory information
Torque tool for tightening X-BT threaded studs
S-TB Torque bar


Description
Torque-controlled socket wrench for setting HSA anchors
Connection end
1/2 in square

New

Check gauge D=8-10-14mm
Description
Cheque gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
Material, corrosion
Carbon steel
Head configuration
n/a
PROFIS software
No

New

Check gauge HUS 8-10-14mm
Description
Cheque gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
Material, corrosion
Carbon steel
Head configuration
n/a
PROFIS software
No

New

Check gauge HUS 12-14-16mm
Description
Cheque gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
Material, corrosion
Carbon steel
Head configuration
n/a
PROFIS software
No

New

Check gauge HUS 10-14-16mm
Description
Cheque gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
Material, corrosion
Carbon steel
Head configuration
n/a
PROFIS software
No

New

Check gauge HUS 12-16mm
Description
Cheque gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
Material, corrosion
Carbon steel
Head configuration
n/a
PROFIS software
No

New

Torque tool S-BT 1/4" - 5Nm
Description
5 Nm torque tool for installing S-BT threaded screw-in studs on aluminium or steel (thickness < 6 mm)
No technical data available
Accessory kit HIT PROFI anchor system
Description
HIT injectable mortar accessory sets
No technical data available

New

Torque tool X-BT 1/4" 20Nm / 14.8lbft
Description
Torque tool for use with new-generation X-BT threaded studs
No technical data available
HSP Setting tool
Description
Setting tool (HSP/HFP)
No technical data available
Hilti HIT-RB Brushing accessories
Description
Injectable mortar accessories for brushing and guiding
No technical data available