Manual setting tool with hand guard, for flush anchors
- Material, corrosion: N/A
From
OMR 20.960
Setting tool – required for installation of HDA undercut anchors
No technical data available
From
OMR 26.640
r7843
Ultimate
Impact socket, long, 1/2"
- Connection end: 1/2" square
- Short/long: Long
- Length: 80 mm
From
OMR 5.940
SI-S 1/2" S
Ultimate
Short 1/2" impact sockets
- Connection end: 1/2" square
- Short/long: Short
- Material coating/plating/finish: Black phosphate
From
OMR 3.830
r7845
Ultimate
Slim socket (for installation applications) 1/2"
- Connection end: 1/2" square
- Short/long: Long
- Length: 100 mm
From
OMR 22.610
HKD-TE-CX Setting tool (short)
Ultimate
Setting tool for short HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
- Connection end: TE-C (SDS-plus)
- Base material: Reinforced concrete, Concrete
- Working mode: Hammer drilling
From
OMR 20.160
Setting tool for capsule anchor rods with hexagon heads
No technical data available
From
OMR 55.150
Impact socket SI-SA 1/2" - 7/16" HEX
Ultimate
Impact socket accessories and adapters
- Connection end: 1/2" square, 7/16" hexagonal
- Short/long: Long
- Length: 50 mm
OMR 12.590
E-Spring 3/4" =<27mm / 1 1/16" MP5
Ultimate
Impact socket accessories and adapters
- Connection end: 3/4" square
- Short/long: Long
- Material coating/plating/finish: none
OMR 1.020