Ultimate-performance collated nails for fastening to concrete and other base materials using powder-actuated tools
- Base materials: Concrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
OMR 0.090
High-performance single nail for use with powder-actuated tools on concrete and other materials
- Base materials: Concrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
From
OMR 0.100
X-U MX
Ultimate
Ultimate-performance collated nails for fastening to concrete and steel using powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
OMR 0.100
X-U P8
Ultimate
High-performance single nail for concrete and steel, for powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
OMR 0.090
X-U P8
Ultimate
Ultimate-performance single nail with steel washer for fastening to concrete and steel using powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
- Environmental conditions: Dry indoor
From
OMR 0.180
Premium collated nails for fastening to concrete using powder-actuated tools
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick), Concrete, soft, Soft to medium reinforced concrete
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
OMR 0.060
X-C P8
Premium
Premium single nail for fastening to concrete using powder-actuated tools
- Base materials: Concrete (soft), Masonry (solid limestone brick), Concrete
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
OMR 0.050
Premium single nail with steel washer for fastening to concrete using powder-actuated tools
- Base materials: Concrete, Concrete (soft), Masonry (solid limestone brick), Soft to medium reinforced concrete, Concrete, soft
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
OMR 0.070
X-CR P8
Ultimate
Stainless steel single nail for steel and concrete, for powder-actuated tools
- Minimum thickness of base material (steel): 5 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
- Environmental conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution
From
OMR 0.640
X-CR S12
Ultimate
Single nail for use with powder actuated tools on steel in corrosive environments
- Base materials: Concrete (normal weight over metal deck)
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
From
OMR 0.790
X-CR P8 S
Ultimate
Single nail with steel washer for use with powder actuated nailers on steel and concrete in corrosive environments
- Base materials: Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
From
OMR 1.110
X-ENP MX
Ultimate
Collated nails for fastening metal decks to steel structures with powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
OMR 0.460
X-ENP
Ultimate
Single nail for fastening metal decks to steel structures with powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
OMR 0.460
X-ENP HVB
Ultimate
Single nails for fastening shear connectors to steel structures with powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
OMR 0.330